The "Universal" Clipdraw attaches in seconds with 3M Corp. #4941 VHB (very high bond) double coated tape. VHB tape is used in the construction and aircraft industries as a replacement for rivets. It provides a 20 lb. continuous bond that resists oil, solvents, heat and vibration. Heavy recoil and rapid slide movement have no effect on the bond strength between gun and Clipdraw. The Clipdraw stays solidly in place with adhesion actually increasing over time. The "Universal" Clipdraw consists of two parts. The mounting plate attaches to the gun with the double coated tape. The clip part screws to the mounting plate with two 1/8" button head screws.
#RV mounts on either side of the slide or frame. Mounting requires just 3" x 1/4" of flat surface which can include grooved or textured areas. VHB tape provides full adhesion on steel, aluminum or polymer surfaces.
Switching to a holster is simple. Just remove the clip part and in most cases the gun can be holstered with the low profile mounting plate left in place. No need to remove and replace the tape each time.
|
|
View Cart
